| Manufacturer |
Disano Illuminazione |
| Short product code |
970 |
| Order code |
164732-00 |
| European Article Number (EAN) |
8012952143928 |
| Product name |
Thema - LED |
| Housing |
injection-moulded, made of grey RAL 7035 polycarbonate, shatterproof, UV-stabilised, with high mechanical strength thanks to the structure reinforced by internal ribs. |
| Colour - Housing |
Grey |
| Diffuser |
injection-moulded in polycarbonate with internal grooves for greater light control, self-extinguishing V2, UV-stabilised, smooth outer finish to enable easy cleaning for maximum light efficiency. |
| Optics |
galvanised steel pre-painted in oven with white polyester resin, UV-stabilised. Fastened to the body with a quick coupling by means of a device machined directly on the body. |
| Wiring name |
CLD |
| Nominal frequency |
50 Hz |
| Voltage type |
AC |
| Min Voltage (V) |
220 V |
| Max Voltage (V) |
240 V |
| Min Frequency (Hz) |
50 Hz |
| Max Frequency (Hz) |
60 Hz |
| Controllability |
None |
| Low flicker |
luminaire with very low flicker: evenly distributed light for greater visual safety. |
| Power factor |
≥ 0.95 |
| Equipment |
- sealing gasket in eco-friendly, anti-aging expanded polyurethane foam- ceiling mounting brackets and suspension hook in stainless steel- plug-socket connector- clamp and safety screws in stainless steel |
| On request |
- narrow beam, subcode -22- continuous row with connector on both ends, subcode -0072- radar sensor for ON-OFF watertight fixtures, subcode -19- with CLD-EC wiring for centrally powered emergency lighting, subcode -0050 |
| Light source |
LED |
| Output luminous flux |
3442 lm |
| Total system power |
25 W |
| CCT |
4000 K |
| CRI |
≥80 |
| Colour consistency (MacAdam Ellipse) |
SDCM3 |
| Luminous efficacy |
138 lm/W |
| Ambient temperature - max |
40 °C |
| Ambient temperature - min |
-30 °C |
| Lumen maintenance Ta 25° (L) |
80 |
| Failure rate (Ta=25°C) (B) |
50 |
| LED Rated Life - (h) |
60000 hr |
| Photobiological risk |
RG0 |
| Regulations |
EN60598-1. With degree of protection according to EN60529. The lighting fixture meets all IFS and BRC requirements, and the regulation of the HACCP Directive regarding lighting systems installed in food processing plants. |
| Laboratory tests |
- the UL 94 Standard is considered a reference for rating the ignition characteristics of plastic materials. The watertight fixtures are made of V2 class material that self-extinguishes in 25 seconds.- passes the Glow Wire Test at 850 °C. |
| Markings - Certifications |
CE, ENEC |
| Electrical insulation class |
Class I |
| IP (Total) |
66 |
| IK |
IK08 |
| Luminaire height |
102 mm |
| Luminaire Width |
120 mm |
| Luminaire length |
1260 mm |
| Net weight |
1.84 kg |
| Warnings |
ATTENTION !Do not install on surfaces subject to strong vibrations, outdoors on hanging cables, or on walls under metallic grates, or on poles, and in any case, never expose the fixture to direct sunlight. Check the compatibility between the material constituting the product and the space where it will be installed.We recommend the use of fixtures made of steel with direct exposure to sunlight. |
| Warranty |
5 yr |
| Energy label |
C |
